|Engine Type:||Diesel||Engine Number:||S6K 3066|
|Part Number:||5I-7738 5I-7739 2128477||Product Name:||Valve|
|Quality:||High Quality, Low Price, Long Life||Original Loion:||CG45, EX100W, EX100WD, EX125WD-5, EX160WD, EX200, EX200-2, EX200-3, EX200-3C, EX200-3E, EX200-5, EX200-5 JPN, EX200-5HG, EX200-5HHE, EX200-5LV JAP, EX200-5X JPN, EX200-5Z JPN, EX200K, EX200K-2, EX200K|
3066 intake valve in engine,
S6K intake valve in engine,
320 inlet valve in engine
S6K 3066 Excavator Valve apply to 311B 311C 312B 312C 320 320B 320C 5I-7738
|Engine Model||S6K 3066|
|Place Of Origin||China|
|PACKING||Neutral Packing or as required|
|Delivery Time||5-15 days|
|Payment Terms||TT / Western Union / Paypal|
Compatible equipment models: 2128477
EXCAVATOR 311C 312C 312C L 314C 318C 319C 320C 320C FM 320C L 320D 320D LRR 321C 323D L 323D LN
Event E039Conditions Which Generate This Code:The Electronic Control Module (ECM) detects all of the following conditions:
The engine has been running for at least 10 seconds after engine speed is within 50 rpm of low idle.
Engine oil pressure is below the trip line in Illustration 1 for 2 seconds.
100-03 "Engine Oil Pressure open/short to +batt" is not active.
100-04 "Engine Oil Pressure short to ground" is not active.
Illustration 1 g00994984
System Response:The event is logged. The ECM derates the value for the full torque setting of the engine by 15 percent.Possible Performance Effect:
There may be a problem with the engine lubriion system.
There may be a problem with the engine oil pressure sensor.Test Step 1. Check for Diagnostic Codes.
Connect the Electronic Technician (ET) to the service tool connector.
Turn the keyswitch to the ON position.
Check for any active diagnostic codes or logged diagnostic codes. Expected Result:No diagnostic codes are present.Results:
OK - No diagnostic codes are present. Proceed to Test Step 2.
Not OK - Diagnostic codes are present.Repair: Repair the diagnostic codes that are present. Refer to the appropriate topic in the "Troubleshooting With a Diagnostic Code" section of this manual. Ensure that the repair eliminates the problem.STOPTest Step 2. Perform a Check of the Engine Lubriion System.
Perform a check of the engine lubriion system. Refer to Troubleshooting, "Low Engine Oil Pressure". Expected Result:There are no problems with engine oil pressure.Results:
OK - There are no problems with engine oil pressure. There may be an intermittent problem.Repair: Monitor the operation of the engine. Repair the problem. Ensure that the repair eliminates the problem.STOP
Not OK - There are problems with engine oil pressure.Repair: Repair the problem. Ensure that the repair eliminates the problem.STOP
Contact Person: He Zhenguang